Xantrex Technology DR1512E Battery Charger User Manual


 
AC Wiring
975-0012-01-02 Rev A 2–27
AC Input Wiring using a Generator in an On-Grid Application
If a generator is used as a backup for the utility, then a manual transfer switch
must be added to provide a means to switch the generator power to the inverter’s
inputs. The generator can be used during extended outages to recharge the
batteries and provide pass through power for the loads. Start and stop the
generator manually using the generator’s pull-cord, ON/OFF switch, etc.
Figure 2-19
AC Wiring using a Generator - On-Grid Application