Yamaha EF4500iSE Welding System User Manual


 
13
AE01083
Battery preparation
(See page 30)
w
Battery electrolyte is poisonous and dangerous,
causing severe burns, etc. It contains sulfuric (sul-
phuric) acid. Avoid contact with skin, EYES or
clothing.
Antidote:
EXTERNAL-Flush with water.
INTERNAL-Drink large quantities of water or milk.
Follow with milk of magnesia, beaten egg or veg-
etable oil. Call physician immediately.
Eyes: Flush with water for 15 minutes and get
prompt medical attention. Batteries produce explo-
sive gases. Keep sparks, flame, cigarettes, etc.
away. Ventilate when charging or using in closed
space. Always cover eyes when working near bat-
teries. KEEP OUT OF REACH OF CHILDREN.
762-012
1. Remove the bolts 1, and then pull outward on the
areas of rear cover 2 shown.
2. Remove the wing nuts 3 and battery plate 4.
3. Remove the battery 5.
4. Fill the battery with the electrolyte.
Refer to the instruction sheet included with the
electrolyte for filling instructions.
5. Turn the engine switch to the STOP position to
prevent accidental short circuiting.
6. Connect the positive lead (red) 6 to the positive
(+) battery terminal 7.
7. Install the battery 5 onto the tray.
8. Install the battery plate 4 and tighten the wing
nuts 3.
1
2
788-7XFb
3
5
4
762-7XFa
6
7
762-7XFc
7XF-28199-10_a 08.1.31 9:19 Page 13