
4
A
B
O
U
T
T
H
I
S
G
U
I
D
E
Additional Safety Information
See also the Important Safety Information at the front of this guide.
When using the unit, observe the following safety information:
■
Retain this user’s guide for later use and pass it on in the event of
change of ownership of the unit.
■
Protect the unit from sudden, transient increases and decreases in
electrical power by fitting an in-line surge suppressor or
uninterruptable power supply.
■
Products manufactured by us are safe and without risk provided they
are installed, used and maintained in good working order in
accordance with our instructions and recommendations.
■
If any of the following conditions occur, isolate the electricity supply
and refer to your 3Com reseller.
■
If the module begins to make an odd noise, smell or smoke.
■
If the module shows signs of a distinct change in performance.
■
Do not spill food or liquids on the unit. If the unit gets wet, isolate the
electrical supply and contact your 3Com reseller.
■
Do not push any objects into the openings of the unit. Doing so can
cause fire or electric shock by shorting out internal components.
■
o
Be sure nothing rests on the module’s system cables and that the
cables are not located where they can be stepped on and cause
damage to the unit.
■
Keep the unit away from radiators and heat sources.
■
Install the unit in a clean area that is free from dust or extreme
temperatures.
■
This product complies with the electro-magnetic compatibility (EMC)
requirements of EN 55022 Class A and EN 50082 (susceptibility) when
the following prerequisites are observed;
■
the WAN port must be attached to a screened digital cable.
■
the ISDN cable must be used in conjunction with a three turn ferrite.