1154 CHAPTER 76: OSPF CONFIGURATION COMMANDS
View User view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
Description Use the
reset ospf process command to reset all OSPF processes or a specified
process.
Using the reset ospf process command will:
■ Clear all invalid LSAs without waiting for their timeouts
■ Make a newly configured Router ID take effect
■ Start a new round of DR/BDR election
■ Not remove any previous OSPF configurations
The system prompts whether to reset OSPF process upon execution of this
command.
Examples # Reset all OSPF processes.
<Sysname> reset ospf process
reset ospf redistribution
Syntax reset ospf [ process-id ] redistribution
View User view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
Description Use the
reset ospf redistribution command to restart route redistribution.
Examples # Restart route redistribution.
<Sysname> reset ospf redistribution
rfc1583 compatible
Syntax rfc1583 compatible
undo rfc1583 compatible
View OSPF view
Parameters None
Description Use the
rfc1583 compatible command to make routing rules defined in
RFC1583 compatible.
