2 ABOUT THIS GUIDE
Conventions
Table 1 and Table 2 list conventions that are used
throughout this guide.
If you are looking for Turn to
Host connectivity configuration procedures for IBM environments Chapter 5
Troubleshooting tips and procedures Chapter 6
Specifications for cabling and connector pin assignments Appendix A
Instructions about changing configuration settings for the 3C359 NIC
through the DOS Configuration and Diagnostic Program
Appendix B
Technical support information Appendix C
Table 1 Notice Icons
Icon Notice Type Description
Information note Important features or instructions
Caution Information to alert you to potential damage to a
program, system, or device
Warning Information to alert you to potential personal injury
Table 2 Text Conventions
Convention Description
Syntax The word “syntax” means you must evaluate the syntax
provided and supply the appropriate values. Placeholders
for values you must supply appear in angle brackets.
Example:
Enable RIPIP by using the following syntax:
SETDefault !<port> -RIPIP CONTrol =
Listen
In this example, you must supply a port number for
<port>.
Screen displays This typeface represents information as it appears on
the screen.
(continued)
Book Page 2 Saturday, November 1, 1997 3:13 PM
