76 CHAPTER 5: CONFIGURING THE ROUTER
Internet Settings You can configure the settings for your WAN port connection.
ATM PVC This feature is used to configure the parameters for your Internet
connection. The information necessary to complete these screens should
be obtained from your ISP. Check with your ISP first to find out what type
of connection you should choose.
Figure 59 ATM PVC Screen
You should see the first entry already contains information that’s been
configured using the Wizard in the initial setup. If you want to change
that information or set up other connection, click Edit.
There are six options available for the connection mode:
■ Disable — To disable the Internet connection function (see page 77)
■ PPPoE — PPP over Ethernet, providing routing for multiple PCs
(see page 77)
■ PPPoA — PPP over ATM, providing routing for multiple PCs
(see page 80)
■ Bridge Mode — RFC1483 Bridged Mode, (see page 82)
■ Routing Mode over ATM — RFC1483/2684 routing mode over ATM
(see page 84)
■ Dynamic/Fixed IP in 1483 Bridge Mode — Using Dynamic/fixed IP for
WAN connection (see page 86)
