Bair Paws Model 875 Warming Unit Operator’s Manual
6
Check the 3M
TM
Bair Paws
TM
system website to ensure you have the most recent version of this document. www.bairpaws.com reorder #202391A
NOTICE:
1. e Bair Paws warming unit meets the international electronic interference
requirements. If radio frequency interference with monitoring equipment occurs,
connect the warming unit to a dierent power source.
2. Federal law (USA) restricts this device to sale by or on the order of a licensed healthcare
professional.
3. Do not place the warming unit on a soft or uneven surface, such as a bed; this may
cause the air intake to become blocked, compromising the unit’s performance.
4. Do not immerse any part of the Bair Paws warming unit in liquid while cleaning it.
5. Do not use a dripping wet cloth to clean the warming unit.
6. Do not use harsh solvents to clean the warming unit.
7. To the full extent permitted by law, the manufacturer and/or importer declines all
responsibility for thermal injury resulting from the unit being used in conjunction with
products other than Bair Paws warming gowns.
Proper Use and Maintenance
Arizant Healthcare Inc., a 3M company assumes no responsibility for the reliability,
performance, or safety of the unit if:
• modications or repairs are performed by unqualied personnel,
• the warming unit is used in a manner other than that described in the Operator’s Manual,
or
• the warming unit is installed in an environment that does not meet the appropriate
electrical requirements.
Read Before Servicing Unit
All repair, calibration, and servicing of the Model 875 warming unit must be performed by
qualied, medical equipment service technicians who are familiar with good practice for
medical device repair. If the warming unit does not require the manufacturer’s attention, we
will ship replacement parts to your location. Perform all repairs and maintenance in accordance
with the instructions provided with the replacement parts.
