27
Item Description
COLOR SPACE
Select a Color Space Mode:
AUTO RGB SMPTE240 REC709 REC601
• This item can be selected only at a RGB input or a COMPONENT VIDEO
input.
• When the AUTO is selected, the optimum mode is automatically selected.
However, it may not work well at some signals. In such a case, select the
SMPTE240 or REC709 for HDTV signal.
COMPONENT
Select a Function of COMPONENT VIDEO Jacks:
COMPONENT SCART RGB
• When the SCART RGB is selected, the component video jacks function
as ports for a RGB input with a SCART cable. Refer to the section “Signal
Connectors” of “TECHNICAL”.
VIDEO
Select a Signal Type Mode:
AUTO NTSC PAL SECAM
NTSC 4.43 M-PAL N-PAL
• This item performs only at a VIDEO input or a S-VIDEO input. For a
COMPONENT VIDEO input, although this item is ineffective, the signal type is
identified automatically even if the AUTO is not selected.
• Selecting the AUTO automatically selects the optimum mode. However, it
may not work well at a PAL60 signal and some other signals. If the picture
becomes unstable (ex. a irregular picture, color lack), please select the mode
depending on the input signal.
• The AUTO operation requires approximately 10 seconds.
FRAME LOCK
Select the Frame Lock Mode:
TURN ON TURN OFF
• This function performs only at a RGB input with vertical frequency of 48 to 72
Hz.
• When the TURN ON is selected, a moving picture is displayed more
smoothly.
• This function may cause a certain degradation of the picture. In such a case,
please select the TURN OFF.
3D-YCS
Select a 3D-YCS mode:
STILL IMAGE NORMAL TURN OFF
• This function performs only at a VIDEO input of NTSC 3.58.
• NORMAL is the mode for images with a lot of motions like movies, and STILL
IMAGE is the mode for images with few motions or completely still ones like
slides.
• When this function performs, the VIDEO NR function is ineffective.
Multifunctional Settings (continued)
