© Adam Equipment Company 2007
12
C1 Enable check weighing.
7.0 TECHNICAL PARAMETERS
To enter this section, press and hold the [Mode] and the [Tare] key while you
turn on the scale. The display will show the revision number and then the first
parameter Zero Tracking as “ZEO”
7.1 ZERO TRACKING
• When ZEO is displayed, press [Unit] to change to the other setting.
“ZEO= 0FF“ Zero tracking function is disabled.
“ZEO= O
n
” Zer0 tracking function is enabled.
• Press the [Mode] key to store the desired setting and move to the
next function.
7.2 UNIT SETTING
The user will be able to enable the weighing units to be used - grams, pounds
or ounce. Kilogram is the default weighing unit.
• When g is displayed, press the [Unit] key to change to the other
setting.
“g= 0FF“ Gram unit is disabled.
“g= O
n
” Gram unit is enabled.
• Press the [Mode] key to store the desired setting and move to the
next unit setting.
