A SERVICE OF

logo

INSTALLATION
Caution: Be sure to power off your computer before inserting the PCI
adapter.
Install the Driver & Utility
Step 1 Insert the PCI adapter into an available PCI slot and turn on your
computer.
Step 2 Windows will detect the adapter and request for a driver. Click
Cancel to quit the wizard and insert the Installation CD into your CD
drive.
Step 3 Select Install Utility from the setup menu.
Note: If the setup menu does not appear automatically, click Start, Run,
type D:\autorun.exe (where D is the letter of your CD drive) and click
OK.
-
4 -