22
4-2-4. VLAN Group Configuration
Function name:
VLAN Group Configuration
Function description:
In port-based VLAN mode, this will display the ID – Description - and Members
of existing port-based VLAN groups. If in tag-based VLAN mode, this will
display the ID - Description – VID and Members of the existing tag-based VLAN
group. The switch can only be configured to support either port-based VLAN or
tag-based VLAN. When selecting one of the VLAN modes, the switch will
display the appropriate configuration data as required. You can easily create
and delete VLAN groups by using the <Add Group> and <Delete Group>
function buttons, or click the Group ID directly to edit it.
Parameter description:
ID (Group ID):
When you want to edit a VLAN group, you must select the Group ID field.
Then enter your Tag Based VLAN Group Settings or Port Based VLAN
Group Settings depending on your VLAN mode selection.
Description:
The description defined by administrator is associated with a VLAN group.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It appears
only in tag-based mode.
Member:
This is used to add or delete ports as members of this VLAN. Use the check
box (
;) beside the port x to enable it.
