A SERVICE OF

logo

User's Guide 39
Details Tab
Print to the following port
This allows you to select the IO port to link with the printer. The port may be one of
parallel (LPT), serial (COM), network port or file.
If the communication port is the serial port (COM1: or COM2:), check the baud rate and
flow control as they must be consistent between host and printer. The printer’s baud rate
is printed on the following the self-test page. The factory default baud rate is 9600.
Print using the following driver
This must match the printer that is attached (for the FM402DT, FM402TT or FM403TT)
when using the label printer.