®
USER’S GUIDE
network management card
1
Introduction
Product Description
Features
The APC AP9617 Network Management Card EX is a web-based
management product that uses multiple, open standards such as Telnet,
HTTP, and SNMP to provide full management of supported devices:
• The following is a list of some of this Management Card’s features:
– Provides a Data Log accessible by FTP or a Web browser.
– Provides an Event Log accessible by Telnet, FTP, or a Web browser
– Detects connection speed of 10/100 MB per second.
– Generates e-mail notifications for DC Power Plant events and
system events.
– Limits SNMP traps and e-mail notifications based on the severity
level of the DC Power Plant or system events
– For Magnum models, can be managed through InfraStruXure Manager.
Initial set-up
You must define three TCP/IP settings for the Network Management Card
before it can operate on the network.
• IP address of the Management Card
• Subnet mask
• IP address of the default gateway
To configure the TCP/IP settings, see the Network Management Card
Quick-Start Manual (.\doc\en\Qckguide), provided in printed form, and in
PDF on the APC Network Management Card utility CD.
