Vector Floating-point Programming
ARM DUI 0068B Copyright © 2000, 2001 ARM Limited. All rights reserved. 6-5
6.2 Floating-point registers
The Vector Floating-point coprocessor has 32 single-precision registers, s0 to s31. Each
register can contain either a single-precision floating-point value, or a 32-bit integer.
These 32 registers are also treated as 16 double-precision registers, d0 to d15.
dn
occupies the same hardware as
s(2n)
and
s(2n+1)
.
You can use:
• some registers for single-precision values at the same time as you are using others
for double-precision values
• the same registers for single-precision values and double-precision values at
different times.
Do not attempt to use corresponding single-precision and double-precision registers at
the same time. No damage is caused but the results are meaningless.
6.2.1 Register banks
The VFP registers are arranged as four banks of:
• eight single-precision registers, s0 to s7, s8 to s15, s16 to s23, and s24 to s31
• four double-precision registers, d0 to d3, d4 to d7, d8 to d11, and d12 to d15
• any combination of single-precision and double-precision registers.
See Figure 6-1 for further clarification.
Figure 6-1 VFP register banks
Bank 0 Bank 1 Bank 2 Bank 3
d0 d1 d3 d4 d7 d8 d11 d12 d15d2
...... ...
s0 s1 s7 s8 s15 s16 s23 s24 s31s2 s3 s4 s5 s6
... ... ...
