If the face of the grinding wheel is worn unevenly, becomes grooved, or is no longer smooth and
flat, the wheel should be reshaped with a dressing tool (not supplied).
If the diameter of the grinding wheel is no longer round, the wheel should be reshaped with a
dressing tool or replaced.
If the surface of the wheel becomes loaded and dull with workpiece material, the wheel should be
cleaned with a dressing tool.
After reshaping, always readjust the tool rests and spark arrestors.
Maintenance
Maintenance Required Frequency
1. Check power cord Before each use.
2. Check wheels for cracks Before each use.
3. Check moving parts for alignment and binding issues Before each use.
4. Dress Grinding Wheels As needed
5. Replace Grinding Wheels (see manual section for specifics) As needed.
6. Clean and vacuum dust from the motor housing and
other grinder parts As needed.
7. Replace work-light bulb As needed
Service beyond recommended maintenance on these tools should only be performed by an
authorized, qualified technician.
COOLANT TRAY
When grinding, metal objects become heated quickly. It is important to keep moving the object back and
forth across the face of the grinding wheel and to cool the object frequently using the coolant tray.
coolant tray
WORK-LIGHT BULB REPLACEMENT
Use Max 40 W anti-vibration light bulb
Coolant Tray
