Avaya, Inc. - 102 - PARTNER ACS 1600 DSL module User Guide
2. Select Configure Datalink Protocol.
The WAN Datalink Protocol Configuration Menu
displays.
*******************************************
* WAN Datalink Protocol Configuration Menu*
*******************************************
Current DataLink Protocol : Frame Relay
6. ATM
7. Frame Relay
3. Select your choice.
If you select Frame Relay, you must also add or modify a
DLCI and then set the Frame Relay options.
For more information, see the “Configuring Frame Relay
DLCIs” and “Configuring Frame Relay options” sections
later in this chapter, respectively.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
“Getting started” chapter.
You can now configure the physical interface.
Configuring
the Physical
Interface
The following are the WAN interfaces that you can configure:
SDSL
USI
