610-0184-095
A-1
June 14, 2001
Appendix A: CLI Commands for
Queue Classification and Servicing
Overview
This appendix contains the CLI commands that you use to
configure the Queue Classification and Queue Servicing
functionality in Version 5.2 of the Cajun switch software. CLI
commands exist for the following tasks:
■ "Setting the Priority of a Port" on page A-1
■ "Setting a Port to Ignore Tag Priority" on page A-2
■ "Displaying the Port Settings" on page A-3
■ "Setting a Rule in an Access Control List" on page A-4
■ "Displaying Access Control Lists" on page A-6
■ "Setting WFQ" on page A-7
■ "Displaying the Queue Service Settings" on page A-9
* Note: In this release, you can configure the Queue Classification
and Queue Servicing features only by using the CLI. The
features are not available in the Web Agent or SNMP.
Setting the Priority of a Port
Command
Use the set port priority command to set the priority of a
port. The syntax of the command is:
set port default-priority {<slot>|<slot-swport-
range>}[...,{<slot-num>|<slot-swport-range>}]
<priority>
