11
SET-UP INSTRUCTIONS
DO NOT CONNECT the line cord to the wall outlet until the caller ID setup has
been completed. Set the language, contrast, time and date as follows:
TO RESET, press and hold both the †/π buttons simultaneously for four seconds until
“ENTER LANGUAGE” appears.
Press and hold the
†
and
π
button simul-
taneously for four seconds until "ENTER
LANGUAGE" appears, followed by ENG
(English), ESP (Spanish), FRA (French)
for 20 seconds.
1
SELECT THE LANGUAGE:
Press the
† 1
or
π 2
button to select
ENG (English), ESP (Spanish) or FRA
(French). Press the ERASE button
3
to confirm.
2
SELECT THE CONTRAST:
Press the
† 1
or
π 2
button to select
one of the five contrast levels (default is
three). Press the ERASE button
3
to confirm.
3
Press the
† 1
or
π 2
button to select the
present month. Press the ERASE button
3
to confirm. Repeat this step to set the
day. The settings are now complete.
5
SELECT THE TIME AND DATE:
Press the
† 1
or
π 2
button to select the
present hour. Press the ERASE button
3
to
confirm. Repeat this step to set the minutes.
4
