Billion BEC 7800(N) (802.11n) Dual WAN ADSL2+ Firewall Router
-3-
Hardware Overview
The Front LEDs
The Rear Ports
supplied power
adapter to this jack
RJ-11 cable to this port
when connecting to the
ADSL/telephone
network
the device or
restore to factory
default settings
to a LAN port, using the
included Ethernet cable
(with RJ-45 cable)
When power on, it will lit green.
When the system is booting, it
will blink orange at the same
time. While the system is ready,
it will only lit green. When
system booting failed or in the
emergency mode, it will only lit
orange.
WAN 10/100M Ethernet port
(with auto crossover
support); connect Cable
Modem, VDSL, and Fiber
Modem or PON optic lines
with your RJ-45 cable
Ethernet device.
Lit green for 1000Mbps;
Lit orange for 10/100Mbps.
Blinking when data is being
Transmitted / Received.
successfully connected
to an ADSL DSLAM,
(“line sync”).
broadband connection device.
Lit orange for 10/100Mbps.
Blinking when data is
ON/OFF
switch
connection is established. Lit
orange when WPS is enabled.
Flash green when data is sent /
detachable antenna
to trigger Wi-Fi
Protected Setup
fails to get IP address. Flash
green when WAN port gets IP
ad dress successfully and
when data is transmitted.
