04 Unpacking & Inspection
Assembly Instructions
Unpacking & Inspection
Your Blizzard straight blade has been packaged to withstand transit and
weather related damage. Fully inspect all components upon receipt of your
plow. In the event of shipping damage or missing parts, immediately contact
our Customer Service Department toll free at 1-888-680-8600.
Begin unpacking and inspection in the following order:
1. Remove the shipping document from the end panel of the pallet wrap.
Retain all documentation for your records.
2. All wood framing and polyethylene material should be removed from
the pallet for easy access to the snowplow.
3. Due to the odd shaped components and size of several assembly
parts, various cable ties and corrugated material are used for scratch
resistance and package orientation. Please remove these items prior
to assembly.
4. Place the main blade assembly on a flat, level surface.
Once you have inspected all parts and removed all packaging materials,
your snowplow is ready to be fully assembled.
Pallet Wrap End Panel
The tear resistant woven polyethylene pallet wrap
contains a moisture barrier to help protect all
packaged components and keep out the most
inclement weather during shipping and storage.
The end panel of the pallet cover contains impor-
tant information regarding the snowplow model
and the plow’s serial number.Both of these num-
bers are given together. The first three digits
and/or two letters in the the number indicated is
always the plow model 700LD, 760LD, 760 or 800
– and the entire seven (nine) digit number make
up the entire serial number. The shipping docu-
ment is also attached to the end panel.Be sure to
retain this list for your records.
Snowplow Serial Number
Hydraulic Pump Serial Number
Telephone Number
Dealer/Distributor
Date of Purchase
