
12
PROBLEM SYMPTOMS RESOLUTION
Excessive air tank
valve pops off
shut of motor when com-
pressor reaches cut-out
pressure
too high
•
•
Set the On/Off switch to Off, if the unit
does not shut off contact a Bosch fac-
service center
Bosch authorized service center
•
•
Air leaks
enough
•
solution. Do not overtighten.
•
Air leaks in air tank or
at air tank welds
Defective air tank• Air tank must be replaced. Do not repair
the leak
weaken. The air tank can rupture or ex-
plode.
•
•
Air leaks between
head and valve plate
Leaking seals•
Bosch authorized service center
•
valve
•
ring. If valve still leaks, it must be replaced.
•
Carbon build-up in pump
•
•
•
ring. If valve still leaks, it must be replaced.
Add 30W non detergent oil to pump.
Bosch authorized service center
•
•
•
the regulated pres-
sure gauge drops
is used
being used
• It is normal for some pressure drop to oc-
regulator.
used.
•
•
TROUBLE SHOOTING
-
tive actions. The operator or maintenance personnel can perform some corrective actions, and others