Easy Wireless Flash Shooting
An easy, basic, and fully-automatic wireless flash shooting is explained
below.
Fully Automatic Shooting with One External Speedlite
Steps 1 to 4 and 6 apply to all
wireless flash shooting. Therefore,
these steps are omitted in the other
wireless flash setups explained on
the pages hereafter.
Press the <{ > button to raise the
built=in flash.
_ Forwireless flash shooting, be sure
to raise the built-in flash.
Select [Flash control].
_ Under the [ยข='] tab, select [Flash
control], then press <_-_>.
_ Select [Evaluative].
_ For [E-TTL II meter.], select
[Evaluative], then press <_-_>.
191
