84
You can select the pixel count and the image quality. There are eight
JPEG image quality settings: 73/83/74/84/7a/8a/b /c.
There are three RAW image quality settings: 1, 41, 61 (p.86)
1
Select [Quality].
Under the [1] tab, select [Quality],
then press <0>.
2
Select the image-recording quality.
To select a RAW setting, turn the
<6> dial. To select a JPEG setting,
press the <U> key.
On the upper right, the “***M
(megapixels) **** x ****” number
indicates the recorded pixel count,
and [***] is the number of possible
shots (displayed up to 999).
Press <0> to set it.
Image-recording Quality Setting Examples
* If [–] is set for both RAW and JPEG, 73 will be set.
3 Setting the Image-recording Quality
73 only
61
+74
1+73
1 only
