31
Copy
Make Double-Sided Copies
You can make double-sided copies from single-sided documents. When using the D560,
you can also make double-sided or single-sided copies from double-sided documents.
1
Place your documents (→p.16).
•
To make double-sided copies from single-sided documents, place the documents in
the feeder or on the platen glass.
• To make double-sided or single-sided copies from double-sided documents, place
documents in the feeder. (D560 only)
2
Switch to the Copy mode (→p.13).
3
Press [ ] (2-Sided) until the indicator of desired 2-Sided copy format is
lit.
• If you press [OK], and then select <Format Settings>, you may specify the
orientation of your documents and the desired nishing format.
<Calendar Type> <Book Type>
4
Press [ ] (Start).
When placing your
documents in the feeder
Copying starts automatically.
When placing your
documents on the
pla
ten glass
1. Press [▲] or [▼] to highlight the size of the original
document, and then press [OK].
• You may specify the scan size as <LGL> size, but
the actual size is <A4> size.
2. Place the next page on the platen glass, and then
press [
] (Start).
• Press [ ] (Start) for every scanning.
3. After scanning all your documents, press [
▲] or [▼]
to highlight <Start Copying>, and then press [OK].
