802.11g 4-Port Wireless LAN Broadband Router
25
parameter specifies the fragment packet size.
DTIM Interval:
Number of beacon intervals between successive Delivery Traffic Indication Maps
(DTIMs).
Preamble Type:
Shows the length of preamble, either Short (72 bits) or Long (144 bits).
Authentication Type:
Type of authentication used in your wireless network.
Enhanced Security:
Option to enable additional security measures, like hiding your Service Set Identifier
(SSID) or blocking unspecified SSIDs.
Peer AP MAC Address:
When Wireless Distribution System is enabled, wirelessly connect Access Points
using several MAC Addresses of PC cards, so that you can extend a wired
infrastructure to locations where cabling is not available.
Security Setting: Use this screen to configure your Gateway for wireless security
access.
Authentication Type:
Select any of Open System, Shared Key or Both authentication algorithm which can
be supported by the Access Point.The default value is Both.
Security Mode:
