Additional Information 147
[Zoom Position at Startup]: Allows you to choose the position of the zoom
when you turn on the camcorder.
[Full Wide Angle]: The zoom position will be at full wide angle.
[Last Used Position]: The zoom position will be at the same position it was
the last time you used zoom.
• When this function is set to [Full Wide Angle] and you manually adjust
the focus, the focus will be lost and autofocus will be activated the next
time you turn on the camcorder.
[Focus Assistance]: When focus assistance is activated, the image at the
center of the screen is magnified to help you focus manually (A 81).
• Using focus assistance will not affect the recordings. It will be cancelled
automatically after 4 seconds or when you start recording.
• This function is available when the shooting mode is set to ,
or .
• This function is available only for recording movies.
[Auto Slow Shutter]: The camcorder automatically uses slow shutter
speeds to obtain brighter recordings in places with insufficient lighting.
• Minimum shutter speed used: 1/30; 1/12 when the frame rate is set to
[»]; 1/15 when it is set to [½].
• This function is available when the shooting mode is set to , but
the setting will not change even if you set the shooting mode to .
• If a trailing afterimage appears, set the slow shutter to [j Off].
[Flicker Reduction]: If the screen starts to flicker when recording movies
under fluorescent lights, change the setting to reduce the effect.
[Face Detection &
Tracking]
[i On }], [j Off] 76
[Auto Backlight
Correction]
[
i On], [j Off] 80
[Auto Slow Shutter] [
i On], [j Off] –
[Flicker Reduction] [j
Off], [: 50 Hz], [; 60 Hz] –
[Image Stabilizer] [
Dynamic], [ Standard], [j Off] 75
[Intelligent IS] [
È With È], [ Without È]45
[Video Snapshot
Length]
[C 2 sec], [
D 4 sec], [F 8 sec] 74,
92
Menu item Setting options
A
SCN
