9-3
SOLUTIONS TO COMMON PROBLEMS
9
■ Cleaning the scanner components
4
When you are finished, close the printer cover.
Be sure to close the printer cover until it locks into place.
5
Reconnect the power cord.
• If the scanner components are dirty, the documents you send or copy will also be dirty.
• Use a soft, lint-free cloth.
Do not use tissue paper, paper towels, or similar materials for cleaning.
1
Disconnect the power cord from the fax.
2
Open the printer cover.
3
While holding the scanning unit, flip down the scanning unit cover, marked with a white
strip inside, clean the components.
Wipe with a clean, soft, lint-free cloth moistened with water, then wipe with a clean, soft, dry, lint-free
cloth.
4
When you are finished, close the printer cover.
Be sure to close the printer cover until it locks into place.
5
Reconnect the power cord.
Scanning unit
Scanning unit cover
