79
Add New Hardware Wizard or New Hardware Found (Windows 2000)
Wizard displays when the camera is connected to the computer with an
interface cable.
Click [Cancel] to close the window. Temporarily disconnect the camera from the
computer. Next, read Start by Checking This on the previous page and resolve
the problem.
Images won’t download into a TWAIN-compliant program (Camera and
computer connected via interface cable (Windows 2000, Windows 98 SE)).
Click the [Finish] button in the Camera Control Window to close it.
Cannot download images or shoot remotely. (For cameras connected to
the computer via an interface cable: only cameras supporting Hi-Speed
USB 2.0).
The problem may be resolved by lowering the transmission speed for data by
following the procedures below.
Solution:
Hold the MENU button on the camera down and press the (Print/Share)
button and FUNC./SET button simultaneously. In the displayed screen, select [B]
and press the FUNC./SET button.
Camera not detected, Events dialog won’t display or images will not
download to the computer (when camera is connected to the computer
via an interface cable).
Cause 1:
There is a problem with one of the items in the Start by Checking This
section (p. 78).
Solution:
Resolve the problem.
Cause 2:
The USB driver is not installed (Windows only).
Solution:
Install it with the procedures in Installing the Software and USB Driver (p. 10).
Cause 3:
The USB driver is not correctly installed (Windows only).
Solution:
Uninstall the driver (p. 75) before reinstalling it with the procedures in Installing
the Software and USB Driver (p. 11).
SSG.book Page 79 Tuesday, November 22, 2005 12:19 PM
