105
E
Using a Memory Card
(ELURA20 MC only)
CARD PHOTO REVIEW
1. During/after recoding a still image, press the CARD
-
button to
open the CARD PHOTO REVIEW menu.
• If you press the button after recording a still image, the last image recorded
appears in the display.
• If you press the button while recording a stilll image, the menu appears
immediately.
• PROTECT , IMAGE ERASE settings appear.
• If you select |RETURN, the still image disappears.
2. Select PROTECT and press the SELECT dial in.
• The protect mark appears on the image.
• Now you are unable to erase this image.
• Press the SELECT dial again to cancel it.
• If you select |RETURN, the still image disappears.
2. Select IMAGE ERASE and press the SELECT dial in.
• ERASE THIS IMAGE? NO YES appears in the display.
3. Select YES and press the SELECT dial in.
• The image is erased.
To erase an image
To protect an image
● Erasing Still Images
Erase images singly or all at once.
• You cannot erase protected images. Cancel image protection ( 107) first in
order to erase an image.
• Erase images with caution. Once an image has been erased it cannot be
restored.
There are 3 ways to erase a single image.
To erase images one at a time
1. ➡ CARD PHOTO REVIEW menu ( 105)
2. ➡ File Operation menu ( 106)
To erase images one at a time or erase all images on the memory card at once
3. ➡ Card Operations submenu ( 110)
: When playing back an image in CARD PLAY mode
: When displaying an index screen in CARD PLAY mode
INDEX
SINGLE
SINGLE
