Getting Started
Preparations
27
4 Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
finger, and the start/stop button with
your thumb.
5 Attach the supplied
shoulder strap.
Pass the ends through the strap
mount and adjust the length of the
strap.
The Wireless
Controller
Inserting the Battery
(Lithium Button Battery CR2025)
1 Press the tab in the direction of the
arrow and pull out the battery
holder.
2 Place the lithium button battery with
the + side facing up.
3 Insert the battery holder.
Using the Wireless Controller
Point the controller at the camcorder’s
remote sensor when you press the
buttons.
NOTES
The wireless controller may not work properly
when the remote sensor is situated under
strong light sources or direct sunlight.
If the wireless controller does not work, check
that [WL.REMOTE] is not set to [OFF ]
( 48). Otherwise, replace the battery.
Tab
D119_PAL-E.book Page 27 Wednesday, December 20, 2006 10:27 AM
