Canon EF 24-105mm f/3.5-5.6 IS Manual

next previous

ENG-11

You can use the image stabilizer in AF or MF

mode.

This function provides optimal image stabilization

depending on shooting conditions (such as

shootingstillsubjectsandfollowingshots).

1 Set the STABILIZER switch to ON.

● If you are not going to use the image stabilizer

function,settheswitchtoOFF.

When you press the shutter button halfway,

the Image Stabilizer will start operating.

● Makesuretheimageintheviewnderisstable,

thenpresstheshutterbuttontherestoftheway

downtotakethepicture.

Image Stabilizer

● The Image Stabilizer cannot compensate for a

blurred shot caused by a subject that moved.

● The Image Stabilizer may not be fully effective

if you shoot from a violently shaking vehicle or

other transportation.

● TheImageStabilizerconsumesmorepower

thannormalshooting,resultinginfewershots

and a shorter movie shooting time.

● Whenshootingastillsubject,itcompensatesfor

camera shake in all directions.

● It compensates for vertical camera shake during

followingshotsinahorizontaldirection,and

compensates for horizontal camera shake during

followingshotsinaverticaldirection.

● Whenyouuseatripod,theImageStabilizer

shouldbeturnedofftosavebatterypower.

● Evenwithamonopod,theImageStabilizerwill

be as effective as during hand-held shooting.

However,dependingontheshootingenvironment,

the Image Stabilizer effect may be less effective.

● Theimagestabilizerfunctionalsooperateswhenthe

lensisusedwithanExtensionTubeEF12IIorEF25II.

● Ifyousetthecamera’sCustomFunctionto

changetheassignedbuttontooperatetheAF,

theImageStabilizerwilloperatewhenyoupress

thenewlyassignedAFbutton.

COPY