SENDING DOCUMENTS
4
4-5
Canceling sending
1 Press [Stop].
n
When you cancel sending, you may need to press and hold [Start/Copy] for a few seconds, then
the fax will feed out the document.
Automatic dialing
Sending a document using one-touch speed
dialing or coded speed dialing numbers ______
To use this feature you must first register numbers for one-touch speed dialing (see pp. 2-11, 2-12)
or coded speed dialing (see p. 2-13).
1 Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and the contrast (see p. 4-1).
2 Press the one-touch speed dialing button under which the number you wish to fax is
registered.
905 795 xxxx
-or-
Press [Coded Dial/Directory] and enter the appropriate two-digit coded speed dialing
code.
The registered name and number appear.
If you make a mistake, press [Stop]. Then press the correct one-touch speed dialing button or press
[Coded Dial/Directory] and re-enter the code.
1 49 39 xx xx
3 Press [Start/Copy].
The fax begins sending.
