9
1
SETTING UP
Installing the ink film
You must install the ink film before receiving or copying documents.
For information on replacing a used ink film cartridge, see Replacing the ink film on p. 48.
1 Lift the operation panel gently with pushing up the
open lever until it locks into position.
Make sure the handset is on its cradle.
2 Remove the elastic bands from the ink film cartridge
and attach it to the ink film holders (2 holders).
We recommend you do this on a flat stable surface such as a
table.
3 Rotate the blue gear on the holder and front roller of
right side to arrow direction to take up any slack in the
ink film.
If a label is visible on the ink film, turn the blue gear on the
holder until the label is no longer visible.
Open lever
Ta b
Rear Roller
Front Roller
Slots
Notch
Gear
• Align the notches on the front
roller with the slots on the
center core of the ink film.
• Align the notches on the rear
roller with the slots on the
center core of the ink film.
Thalia.book Page 9 Tuesday, September 28, 2004 10:13 AM
