65
Press or and hold it down to run
quickly through the still images.
1 If the function guide does not
appear on screen, press to
display it.
2Press to select .
3 Press or to select [ JUMP
10 IMAGES] or [ JUMP 100
IMAGES].
4 Press or to jump the number
of images selected and press .
• You can press again to hide
the function guide.
• You can also use the control dial.
IMPORTANT
• Observe the following precautions while
the card access display ( ) appears
on screen, and when the CARD access
indicator is on or flashing. Failing to do
so may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not remove the memory card.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
/ switch or the operating mode.
• The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Slideshow
FUNC.
( 23)
1 Press .
2 Press or to select
[ SLIDESHOW] and press .
You can also use the control dial.
3 Press or to select [START]
and press .
• Images are played back one after
another.
• Press to stop the slideshow.
Index Screen
1 Press the W side of the zoom lever.
The still images index screen appears.
2 Use the navigation buttons to
select an image.
• Move the green selection frame to
the image you want to view.
• You can also turn the control dial
to run quickly through the index
screens.
3 Press .
The index screen closes and the
selected image is displayed.
TO RUN THROUGH THE STILL IMAGES
TO SKIP 10 OR 100 STILL IMAGES
FUNC.
FUNC.
D122_PAL_E.book Page 65 Thursday, July 19, 2007 6:54 PM
