A SERVICE OF

logo

11-8
Troubleshooting
15 Close the rear cover.
This operation is required only when
<PAPER JAM/OPEN REAR COVER>
appears on the LCD display.
CAUTION
Be careful not to get your fingers caught.
16 Load the paper into the paper
feeding tray.
17 Set the dust cover on the paper
feeding tray.
NOTE
After all the procedures are completed, the
machine should be ready for operating. If
the machine returns to the standby mode,
troubleshooting has been successful. If the
machine does not return to the standby
mode, check if jammed paper is still left in
the machine.