5. Perform setup with the Setup CD-ROM or perform it according to the instructions on our website.
Cannot Communicate with the Machine while It Is in the Access Point
Mode
Check1
Make sure that the machine is turned on.
Check2
Is Change LAN in LAN settings under Device settings set to LAN inactive
or Wireless LAN?
Select Access point mode.
Check3
Have you selected the machine as the destination of your external
communication devices (e.g. computers, smartphones, or tablets)?
Select the access point name (SSID) of the machine with your external communication devices.
Check4
Have you entered the proper password specified for the access point mode?
If the security setting of the access point mode is enabled, you need to enter the password to connect your
external communication device to the machine. Confirm the specified password, then enter the proper one.
Check5
Make sure that external communication devices are not placed far away from
the machine.
Locate your external communication device close enough to communicate with the machine.
Check6
Make sure that there is no obstruction.
Wireless communication between different rooms or floors is generally poor. Adjust the location of the devices.
Check7
Make sure that there is no source of radio wave interference in your vicinity.
If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed
nearby, the device may cause interference. Place the wireless station as far away from the interference source
as possible.
Check8
Are you trying to connect 6 devices or more?
You can connect up to 5 devices using the access point mode.
Cannot Print, Scan, or Fax from a Computer Connected to the
Network
Check1
Make sure that the network settings of the computer are correct.
796
