Use for remote manual flash
FlexTT5 mounted with Velcro
®
& connected to studio flash
17
Manual Flash (cont’d)
Other Manual Flashes
Connect the remote FlexTT5’s port to your ash’s
sync terminal using:
a) the correct PocketWizard ash sync cable for best results.
- or -
b) your ash’s original sync cable and a PocketWizard PC
female adapter, part number MPCF (804-605).
Visit the PocketWizard.com Cable Finder for help selecting
the correct ash sync cable. Using a PocketWizard direct cable
is always preferred over an adapter for ultimate reliability.
DO NOT connect a ash to port. You could damage
your FlexTT5. This port is only for triggering a Canon motor drive
and is not designed for the voltages or current found on ashes.
Attempting to connect 2 ashes to the port, or 1
ash to this port while there is another in the FlexTT5’s shoe,
can be dangerous. Different ashes can have very different
sync voltages. Connecting them together could cause
damage to the ashes, and they may not trigger. 2 identical
ashes with known identical sync voltages may work when
connected together, but operation is not guaranteed to be
risk free.
For guaranteed safety and secure triggering, one PocketWizard
per remote ash is recommended. If you need to trigger more
than 1 ash from a single remote FlexTT5, consider setting the
additional ash to use its optical slave.
