104
When shooting movies:
1. Set the mode switch to .
2. Press the button.
3. Use the or button to select .
4. Press the button.
2
Press the button.
•
The camera will switch to Color Input
mode and the display will alternate
between the original image and the
color accent image (using the
previously set color).
3
Aim the camera so that the color you wish to
retain appears at the center of the LCD
monitor and press the button.
• Only one color can be specified.
• You can use the or button to specify the range of colors
that are retained.
4
Press the button to complete the setting,
then shoot.
z The default color accent is green.
z You may not obtain the expected results if you use the flash.
z The specified color accent and color range is retained even if
the camera’s power is turned off.
–5: Only takes the color that you want to retain
+5: Also takes colors close to the one that you want to retain
(EC237) CDI-E359_PSSD770_IXUS85IS_Guide_EN.book Page 104 Friday, January 25, 2008 10:01 AM
