135
4
Registering Camera Server and Setting Recording Schedule
Setting the Preset Tour
If the following warning appears, change the settings according
to the tables below.
Warning example
* The tour time shown depends on the settings.
Click Cancel to return to the setting screen.
Click OK to save the current settings.
(If you are using the Preset Setting Tool, click Save on the setting
page of the tool)
Endurance of the pan/tilt mechanism is approximately 100,000
round trips at the full range. The total tour time depends on the
combination of the movement rate, movement range, and still
time. Refer to the following tables.
Total tour time for 100,000 round trips in the pan direction
(estimated).
Example: If the movement rate (PT) is 1, still time is 30 seconds,
and movement range (angle) in the pan direction is 50
degrees, it takes approximately 9,444 hours for 100,000
round trips in the pan direction.
