A SERVICE OF

logo

XRD9829REF
8
Rev. 1.00
12. Select the Start Menu, choose Programs, then choose XRD9829REF icon
13. A window will pop up as shown below. The upper window shows the Plot of Captured
Data and the lower window shows the Histogram of data. Figure 3 shows the pop-
up window when ScanIt is first
started.
Figure 4. ScanIt Software Window Before Scanning
14. Select SETUP from the pull-down menu and choose I/O ADDRESS. In the window
thatpops up, type in the Input/Output Range of Printer Port of your computer. The
default setting is 378H.