86
Using the Full Range
of Features
E
Returning to a Pre-marked Position
If you wish to return to a particular scene
later, mark the point with the zero set
memory and the tape will stop at that point
when you rewind/fast forward the tape.
1. Press the ZERO SET MEMORY button at the point
you wish to return to later.
• “0:00:00 ” appears.
• To cancel, press the ZERO SET MEMORY button again.
2. When you have finished playback, fast forward or
rewind the tape.
• “RTN 1” or “` RTN” appears.
• The tape stops automatically at “0:00:00”.
• The tape counter changes to time code.
❍ Time code and tape counter display may not match accurately.
❍ The zero set memory may not function correctly when blank sections exist on
the tape.
❍ If you remove the tape, the zero set memory is canceled and the counter
display shows the time code.
