E-27
Using a Microphone for Sing Along
To use a microphone for sing along
PREPARATION
• Adjust the main volume (page E-17) and microphone
volume (page E-26).
1
Find the tune you want in the Song Bank List or on
a Smart Media card, and note its number.
• See page A-7 for the Song Bank List.
2
Select the sing along source.
■ Song Bank
Press the SONG BANK button. This enters the Sing
Along Song Bank Mode, and displays the Song Bank
indicator.
■ SmartMedia card
Press the CARD button. This enters the Sing Along Card
Mode, and displays the CARD indicator.
3
Use the number buttons to input the song number.
NOTE
• The initial power on default tune setting is “00”.
• You can also specify the song number using the [+] and
[–] buttons.
4
Press the PLAY/STOP button to start tune play.
• Now use the microphone to sing along with the
playback.
• The Sing Along Mode is similar to the Song Bank
Mode. The only difference is that the melody part in
the Sing Along Mode is played back at a lower
volume. Also a different tone setting is used in the
Sing Along mode to make sing along easier.
5
Use the KEY CONTROL/TRANSPOSE buttons ( / )
to change the overall key of the playback, if you want.
: Raises the key by one semitone
: Lowers the key by one semitone
6
Press the PLAY/STOP button to stop tune play.
• The same song plays in an endless loop until you
stop it.
NOTE
• To return a tune to its default key, press both of the KEY
CONTROL/TRANSPOSE buttons ( and ) at the
same time.
Indicator appears
Indicator appears
653A-E-029A
LK70S_e_26-31.p65 04.8.18, 11:04 AM27
