E-15
Selecting a Rhythm
You can select from among 30 rhythms. See the
rhythm list at the end of this manual (page A-1)
for information about what rhythms are
available.
1.
Press the RHYTHM button.
• This causes “RHYTHM” to appear on
the display, along with the number of
the currently selected rhythm.
2.
Find the rhythm you want in the
“Rhythm List” on page A-1, and then
use the number buttons to input its
two-digit number.
• To select “02 DANCE”, for example,
press [0] then [2].
• You can also use the + (higher) and –
(lower) buttons to change the displayed
rhythm number.
3.
Press the START/STOP button to start
the currently selected rhythm.
4.
Use the [̆] and [̄] TEMPO buttons
to adjust the speed of the rhythm.
• You can set the tempo value in the range
of 40 to 240.
• To return the tempo setting to the initial
default value for the selected rhythm,
press the [̆] and [̄] TEMPO buttons
at the same time.
5.
Press the START/STOP button again
to stop rhythm play.
Initial Default Tempo Settings
The following are the rules that govern the
initial default tempo settings of built-in
rhythms.
• Each rhythm has an initial default tempo
setting that best matches the rhythm.
• Changing the selected rhythm while rhythm
play is stopped automatically changes the
tempo setting to initial default for the newly
selected rhythm.
• Changing the selected rhythm while rhythm
is playing changes the rhythm without
changing the tempo setting. If One-Touch
Preset is turned on (page E-19), the tempo
setting is always changed with selection of a
different rhythm, regardless of whether the
rhythm is playing or not.
274B-E-017A
MA150_e_15-22.p65 03.10.8, 10:45 AMPage 15 Adobe PageMaker 6.5J/PPC
