Chevrolet 2005 Manual

A SERVICE OF

next previous

6. Remove the bulb by

pushing in on the tab on

the bulb socket and

then remove the bulb.

7. Replace with a new bulb.

8. Replace the bulb socket by turning it clockwise into

the bulb assembly.

9. Replace the fasteners into the wheel well trim.

When replacing the fasteners, the two largest

fasteners will be replaced in the two bottom

positions of the wheel well trim. If not, you will ﬁnd

that the fasteners do not ﬁt properly.

Taillamps, Turn Signal, and

Stoplamps

To replace a stoplamp, taillamp/turn signal bulb, do the

following:

1. Remove the screw from the top of the lamp

assembly.

2. Tilt out the lamp assembly.

5-47