A SERVICE OF

logo

Open as PDF
next previous
FSB4090 Installation Instructions
6
9. Lift shelf assembly (B) up from below display and hook onto
interface bracket (A). (See Figure 5)
Figure 5
10. Fasten shelf assembly to interface bracket using two
10-24 x 1/2" buttonhead screws (D). (See Figure 6)
Figure 6
11. Put hook and loop (H) squares together so there are 2
squares.
12. Remove paper from one side of both of the squares.
13. Attach hook and loop squares to top of shelf assembly (B).
(See Figure 7)
Figure 7
14. Remove paper from hook and loop squares and place
remote phone on shelf assembly, pressing it against the
hook and loop squares. (See Figure 8)
Figure 8
9
(B)
(Display with
attached
interface
bracket)
Hook shelf
assembly
10
(D) x 2
(H) x 2
13
Remote phone