7-31
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7 SPVC and SVC Commands
delcon
delcon
Delete Connection
Use the delcon command to delete an SPVC or SPVP. Delete the connection at both ends—first at the
master end, then at the slave.
Cards on Which This Command Runs
AXSM
Syntax
delcon <ifnum> <vpi> <vci>
Syntax Description
Related Commands
dspcon, addcon, cnfcon
Attributes
Example
MGX8850.1.3.AXSM.a > delcon 1 10 40
Deletion successful
ifnum Logical port number. On the AXSM, the range is 1–60.
vpi Virtual path identifier in the range 0–255 (UNI) or 0–4095 (NNI or VNNI).
vci Virtual connection identifier (VCI):
• For a VCC on a UNI, the range is 1–4095. On an NNI or VNNI, the VCI range is
32–65535. For MPLS, the recommended minimum VCI is 35.
• For a VPC, the vci is 0.
Log: log State: active Privilege: GROUP1
