A SERVICE OF

logo

MVS-8100D Hardware Description 2
36 Cognex MVS-8100D and CDC Cameras Hardware Manual
Cable 300-0359
Cognex cable 300-0359 connects the MVS-8100D’s parallel I/O port to the 26-pin input
on the Cognex external I/O module. Figure 16 shows the cable.
Figure 16. Parallel I/O cable 300-0359
The HD-15F side of the cable connects to the MVS-8100D’s parallel I/O port. The
HD-26M side of the cable connects to the external I/O module’s HD-26F connector
labeled “Vision Processor.”
Cognex does not support the connection of devices to the pins of cable 300-0359. The
opto-isolation circuitry is added by circuitry in the external I/O module, not in the cable.
The pinout guide for cable 300-0359 in Table 19 is shown only for reference.
Signal Name Pin on HD-26M Pin on HD-15F
IN_1 1 9
IN_2 2 4
IN_3 3 10
IN_4 4 5
NC 5 NC
NC 6 NC
NC 7 NC
NC 8 NC
OUT_1 9 13
OUT_2 10 8
OUT_3 11 3
OUT_4 12 12
Table 19. Pin numbering of cable 300-0359
HD-15 FHD-26M