Option Description
Date/Time Allows you to set the date and time.
Table 3. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated
network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE (Default Setting)
• Enabled UEFI Network Stack
NOTE: This option is disabled by
default. If you enable this
option, the UEFI Networking
Protocols that are available are
installed, allowing the pre-OS
and the OS networking features
to use the enabled NICs. You
may have to disable the Enabled
w/PXE to use this option.
SATA Operation
Allows you to configure the internal
SATA hard-drive controller. The options
are:
• Disabled
• AHCI (Default Setting)
NOTE: SATA is configured to
support AHCI mode.
Drives Allows you to configure the SATA drives
on board. The option is:
• SATA-0
Default Setting: The drive is enabled.
SMART Reporting This field controls if the hard drive errors
for the integrated drives are reported
during system startup. This technology
is part of the SMART (Self Monitoring
Analysis and Reporting Technology)
specification.
• Enable SMART Reporting — This
option is disabled by default.
USB Configuration Allows you to define the USB
configuration. The options are:
• Enable Boot Support
• Enable External USB Port
• Enable USB 3.0 Controller
34
