xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
9
4
BASIC SWITCH COMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create account [admin | operator | user] <username 15>
config account <username> {encrypt [plain_text| sha_1] <password>}
show account
delete account <username> {<string>}
enable password
encryption
disable password
encryption
show module_info
show device_status
show session
show switch
show serial_port
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never | 2_minutes | 5_minutes |
10_minutes | 15_minutes]} (1)
enable clipaging
disable clipaging
telnet <ipaddr> {tcp_port <value 0-65535>}
enable telnet <tcp_port_number 1-65535>
disable telnet
enable web <tcp_port_number 1-65535>
disable web
save {[config <config_id 1-2> | log | all]}
reboot {<string>}
reset {[config | system]} {<string>}
login
logout
create trusted_host [<ipaddr> | network <network_address>]
delete trusted_host [ipaddr <ipaddr> | network <network_address> | all]
show trusted_host {<network_address>}
