xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
520
debug ospf packet
sending - Set packet sending debug flag.
state - The state of the designated debug flag.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable all OSPF packet debug flags:
DGS-3627:admin# debug ospf packet all state enable
Command: debug ospf packet all state enable
Success.
debug ospf retransmission
Purpose Used to enable or disable debug information flags about retransmission.
Syntax
debug ospf retransmission state [enable | disable]
Description This command is used to enable or disable debug information flags about retransmission.
Parameters
state - The state of the OSPF retransmission debug flag.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable all OSPF retransmission debug flags:
DGS-3627:admin# debug ospf retransmission state enable
Command: debug ospf retransmission state enable
Success.
debug ospf spf
Purpose Used to enable or disable debug information flags about SPF calculation, including intra-
area, inter-area, and AS external.
Syntax
debug ospf spf {all | intra | inter | extern} state [enable | disable]
Description This command is used to enable or disable debug information flags about SPF calculation,
including intra-area, inter-area, and AS external.
Parameters
all - Set all SPF debug flags.
intra - Set intra-area SPF debug flag.
inter - Set inter-area SPF debug flag.
extern - Set AS external SPF debug flag.
state - The state of the designated debug flag.
Restrictions Only Administrator level users can issue this command.
Example usage:
